Website.png.7d0fb9f4080cc9ca53204a4267d3a50a.png)
Mach77
-
Posts
5 -
Joined
-
Last visited
Mach77's Achievements
-
quick question: I looked at the setup and I noticed the suspension is set differently than on CRD, CRC and Willman, reflecting more the nitrogen shocks. will that kind of setting(when dialed up, of course) make its way on the other chassis for the nitrogen shocks as well? -
I've successfully made a pretty good setup for Rampage. it replicates quite consistently the way it raced when Ken Deppe was behind the wheel. that means the wheelie after the first ramp (nearly) all the way to the second ramp. it also replicates that mean stance it had most of the time in 1995: Front Ride Height = -100% Rear Ride Height = 0% Front 4link length = -100%(inverted due to being front mounted on the shafer chassis) Front Fast Bump Damping = 6400 Front Bump Damping = 4000 Rear Fast Bump Damping = 4300 Front Damping Knee = 2 Rear Damping Knee = 2 Front Fast Rebound Damping = 7000 Front Rebound Damping = 4100 Rear Front Rebound Damping = 7600 Front Spring Rate = 23500 Rear Spring Rate = 15000 Front Tyre Pressure = 15 Rear Tyre Pressure = 11.5 Front and Rear Tyre Damping = 1500 it also stops it from doing the insane stoppie. maybe you could include that as a preset in a future update? also, I've tried to find a nice setup for Overkill, since it nosedives easily after the second ramp. after watching multiple PENDA races in both 1994 and 1995, it doesn't nosedive that much. but so far, no good results. definitely one of my favourites, though -
this pack is amazing. the only issue I've found so far are the followings: -on the Chandler chassis(Bigfoot), the cantilevers can sometimes collapse after braking hard (as in after landing to avoid going in the barrier) -on the Shafer chassis, the front axle can head towards the center while braking hard, making the truck do a huge stoppie. I suppose this is due to the front trans-axle not being secured(it moves and looks disconnected when the front suspension is compressed) -on the Bustin' Loose chassis, the engine seems to have its NA and supercharged specs inverted. it seems to have the NA power in the supercharged section, making the truck really slow compared to the others. I don't know if it's intended, but I found it weird otherwise, thank you so much for bringing those 1994 monsters. I would have loved to have Boogie Van as well, but that will maybe come in a future update, I hope
-
Version 1.2.0
472 downloads
I present you 2 different truck with one that has 10 different configurations: -Black Trophy, imagined back in 2007 in the good old Monster Truck Madness 2 era(it's still at mtm2.com btw) -Iceberg, an ice themed monster truck I wanted to make quite recently Specs and configurations: Black Trophy has 11 configurations which are the followings: 1. the original one, 2008, lettered Good Year tyres, 1800hp, HEMI engine 2. the 2014 one. fitted with BKT Gen 1 tyres and has 1540hp instead of the 1800hp for Monster Jam style events 3. the 2020 one. with now the hood being golden yellow and having a litteral "Black Trophy" on it, it also uses CRD 3, thanks to Gameboy3800's adjustable add-ons. same power setup than 2008, though 4. the 2020 Monster Jam one. same as the 2020 one, but based on the 2014 one, with the Monster Jam logo, fitted with BKT Gen 3 and limited to 1540hp 5. the 2020 World Finals one. just a color flipped version of the 2020 one 6. the 2020 Monster Jam World Finals one. same as the 2020 Monster Jam one, but with flipped colors 7. the Alternate body one. that one has a recent little story. at first, I was using a model that isn't available here anymore. when Blue Thunder (Built Ford Tough model) came out, I saw it had the racerback and visor I wanted on the previous model. with that, I made a different version with the 2008 Ford Super Duty model with Hedman headers. since I liked it quite well, I kept it. it is fitted with BKT Gen 3 and limited to 1540hp 8. the Alternate body but with Zoomie exhaust. very explanatory 9. the PENDA Points Series one. different suspension tune than all of the other versions and limited to 1475hp, that one is especially made for the straight line drag races that were heavily present in the PENDA Points Series which I love. 10. the 2022 version. this one is just a standardized version using the 2020 Monster Jam paint. dropping the HEMI engine, it now uses the traditional Merlin engine with Magnaflow exhaust. instead of having a Ford and Dodge flag, it now has a single centered Ford flag 11. the 2023 version. harboring the original livery with a golden reflection(thanks to the specular), this is now the most recent edition. fairly similar in tune than the 2022 one, it is however tuned to a more realistic 1475hp(same as Grave Digger) Black Trophy's specs: 1992 Ford F150 body (Bobcat's pack) 2008 Ford Super Duty body(Alternate version, CRD) CRD chassis(2008, 2014, Alternate body and PENDA variants) CRD 3.0 chassis (starting from the 2020 variant, customizable version from Gameboy3800's pack) Chrysler HEMI engine (Gameboy3800's Adjustable add-ons Pack. under Gameboy3800's Engine mods for 1800hp, under Gameboy3800's League engine mods for the 1540hp ones) Merlin engine (Gameboy3800's Adjustable add-ons Pack. under Gameboy3800's League engine mods) 1800hp for the 2008 version as well as every non Monster Jam versions(the ones that don't have the Monster Jam logo nor the BKT tyres, basically) 1540hp for every Monster Jam variants 1475hp for the PENDA Points Series and 2023 Lettered Good Year (Mjam Pack) or BKT tyre dependent on the version Iceberg's configurations are now up to 3: 1. the original one, with the short wheelbase at the front and the standard one at the rear 2. the 2014 one, I decided to use Black Trophy's 2008 tune and replace the HEMI and Zoomies with the standardized Merlin and Magnaflow, fitted with BKT Gen 1 tyres 3. the 2020 one, using Black Trophy's 2014 chassis (classic CRD) and Black Trophy 2020's tune. once again, using the Merlin and Magnaflow, this time fitted with BKT Gen 3 Iceberg's specs: Cadillac Escalade body (CRD Pack) Merlin Engine (CRD Pack, Gameboy 3800's adjustable add-ons pack) 1540hp (that one is free to tune) shorter wheelbase at the front, default wheelbase at the rear BKT Gen 1 or Gen 3 tyres required packs: -CRD -Mjam Pack -Gameboy3800's Adjustable add-ons pack -Bobcat_Design's pack- 1 review
-
- 1
-
